Open PDFREAL OUTPUT · NO SIGN-UP NEEDED
See the documents before you buy.
Four real PDFs for one sample construction job. Open every page, inspect the detail and download a copy—no email address required.
4one coordinated sample job
PDFedit-restricted PDFs
36job-marked pages
SAMPLE PROJECT · ROOFTOP SOLAR INSTALLATION
Four documents. One consistent job record.
Each sample uses the same scope, client, location, activities and hazards. The job name, document number, revision, status and correct page count appear throughout.
These are demonstration drafts, not generic documents to issue on a live site. A competent person must verify the actual work, site conditions, people, equipment, law and client requirements.
36 DEFINED TOPICS · 6 PRACTICAL GROUPS
A proper toolbox-talk library.
HazardDocs matches the job description and selected hazards to the most relevant talks, then adds project-specific questions and sign-off points.
01
Daily site control
6 topics
- Daily pre-start briefingChanges, interfaces, weather, supervision and the controls that must be in place before work starts.
- PPE selection and careChoosing task-specific PPE, checking condition and understanding why PPE is the last line of defence.
- Housekeeping and safe accessClear walkways, controlled storage, prompt waste removal and safe access to every work area.
- Manual handlingPlanning lifts, reducing load weight and using mechanical aids or team lifts when needed.
- Stop-work authorityGiving every worker clear permission to pause unsafe work without fear of blame or delay pressure.
- Protecting the public and occupantsSeparating construction work from neighbours, visitors and people using an occupied building.
02
Work at height
6 topics
- Working at heightPreventing falls with planned access, collective protection, inspected equipment and rescue arrangements.
- Ladders and stepladdersSelecting, positioning and using ladders only for suitable short-duration, low-risk work.
- Scaffold safetyStatus tags, safe foundations, full platforms, edge protection and control of unauthorised changes.
- Roof work and fragile surfacesEdges, openings, fragile sheets, weather and safe transfer of people and materials onto roofs.
- MEWPs and mobile work platformsPre-use checks, ground conditions, entrapment controls, harness rules and emergency lowering.
- Dropped objectsPreventing tools, fixings and materials from falling into work areas or public routes below.
03
Plant and lifting
6 topics
- Mobile plantCompetent operators, pre-use inspections, pedestrian separation and safe operating limits.
- Reversing and banksman signalsMinimising reversing, maintaining visibility and using one clearly identified banksman.
- Site traffic managementRoutes, crossings, speed control, delivery coordination and separation of vehicles from people.
- Lifting operationsLift planning, competent roles, certified equipment, exclusion zones and control of suspended loads.
- Crane and rigging safetyOutriggers, load charts, sling angles, communication and weather limits for crane lifts.
- Material hoists and winchesSafe loading, landing gates, exclusion zones and preventing use outside rated purpose.
04
Ground and structure
6 topics
- Excavation and trench safetyService detection, collapse prevention, edge controls, safe access and competent inspections.
- Underground servicesDrawings, scanning, trial holes and safe excavation close to electricity, gas, water and communications.
- Overhead power lines and servicesExclusion distances, goalposts, height restrictions and controlled movement of plant and long materials.
- Demolition and strip-outSurveys, isolation, structural sequence, exclusion zones and control of dust and falling materials.
- Temporary worksDesign control, installation checks, loading limits and formal permission before use or removal.
- Concrete and formworkFormwork stability, controlled pours, hose management and protection from wet cement exposure.
05
Energy and permits
6 topics
- Electrical safetyCompetent persons, protected supplies, inspected equipment and safe approach to live or potentially live systems.
- Isolation and lockout/tagoutIdentifying every energy source, proving isolation and preventing unexpected restoration during work.
- Temporary electrical suppliesDistribution boards, RCDs, earthing, cable routes and inspection of temporary site power.
- Hot work and fire watchPermits, removal of combustibles, ventilation, extinguishers and post-work fire monitoring.
- Confined-space entryEntry permits, atmosphere testing, isolation, attendants, communication and a ready rescue plan.
- Permit-to-work disciplineUnderstanding what a permit authorises, when it must be suspended and how the area is safely handed back.
06
Health and emergency
6 topics
- Silica and construction dustWet cutting, extraction, isolation, cleaning and correctly selected respiratory protection.
- Noise and hand-arm vibrationLower-exposure tools, time limits, maintenance and recognising early symptoms before permanent harm.
- Chemicals and safety data sheetsLabels, SDS information, ventilation, storage, spill control and task-specific protective equipment.
- Heat, hydration and severe weatherWork/rest planning, drinking water, acclimatisation and clear stop-work limits for heat, rain, wind and lightning.
- Emergency response and first aidRaising the alarm, giving clear location details, first-aid roles, evacuation and preserving access for responders.
- Incident and near-miss reportingImmediate care, making the area safe, preserving facts and sharing learning without blame.